Samsung 8340 User Manual page 10

HD TERMINAL oR HD pVR wITH STANDARD TV
Even though illico TV new generation was designed for an HD TV, it is still possible to connect
the terminal to a standard TV by referring to one of the following diagrams. However, you will
not benefit from the most optimal TV experience.
poSSIbLE CoNNECTIoN pRoCEDURE
Use this configuration if you are connecting your terminal with red and white RCA cables for
audio, and yellow cables for video.
oTHER CoNNECTIoN pRoCEDURE
Use this configuration if you are connecting your terminal with an S-video cable for video and
a red and white RCA cable for audio.
1. Connect your equipment by following the diagram above.
2. Turn on the terminal by pressing
3. Turn on your TV and select the corresponding AUDiO/ViDEO input (Input 1/2/3 or
HDMI 1/2/3) to display content on-screen.
4. Program your remote to your TV by following the instructions on page 13.
5. Use the remote control that came with your terminal to switch to the channel or service of
your choice.
NOTE: We strongly recommend that you follow the Quick-Start Wizard that will automatically
pop up when you turn on your terminal for the first time.
WARNiNg: If you see "WIZ 502" (error message) on your screen, please contact Technical
Support (see page 45) immediately as certain applications will not work.
For further information, visit videotron.com/terminal-support.
10
Cable
TV
Cable
TV
on your remote control.
RCA audio-video cables
S-video cable
RCA audio cable