Table of Contents
Advertisement
Configuration Menu
Function
Net. Info. - Wired LAN
Network Configuration
Network menu operations
Selecting from the top menu and sub menus, and changing selected items is the same as making operations
from the Configuration menu. When done, make sure you go to the Complete menu, and select Yes, No, or
Cancel. When you select Yes or No, you are returned to the Configuration menu.
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Allows you to continue making settings without exiting the Network menu.
Basic menu
Function
Projector Name
PJLink Password
Web Control Password
Displays the following network setting status information.
•
Projector Name
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
The following menus are available for setting Network items.
•
Basic s
p.78
•
Wired LAN s
p.79
•
Mail s
p.79
•
Others s
p.80
•
Reset s
p.80
The name used to identify this projector on a network.
When editing, you can enter up to 16 single-byte alphanumeric characters. (" *
+ , / ; < = > ? [ ¥ ] ` | cannot be used.)
Set a password to use when you access the projector using compatible PJLink
software. You can enter up to 32 single-byte alphanumeric characters. (Symbols
cannot be used.)
Set a password to use Web Control. You can enter up to 8 single-byte alphanu-
meric characters. (* cannot be used.) Web Control is a function that allows you
to change the projector's settings by using the Web browser on a computer or
smart device connected to the network.
78
Explanation
Explanation
p.63
s
Advertisement
Table of Contents
