Safety Information - PCE Instruments PCE-360 Instruction Manual

1. SAFETY INFORMATION

This Instruction Manual provides information and warnings essential for operating
this meter in a safe manner and for maintaining it in safe operating condition. Before
using this meter, be sure to carefully read the following safety information.
• During high voltage measurement, incorrect measurement procedures could
result in injury or death, as well as damage to the meter. Please read this
manual carefully and be sure that you understand its contents before using the
meter.
• Do not use the meter or test leads if they look damaged.
• Use extreme caution when working around bare conductors or bus bars,
Accidental contact with the conductor could result in electric shock.
• To avoid damages to the meter, do not exceed the maximum limits of the input
values shown in the specifications.
• Use the meter only as specified in this manual, otherwise, the protection
provided by the meter may be impaired.
SAFETY SYMBOLS
• Caution refer to this manual before using the meter.
• This symbol is affixed to the meter where the operator should consult
corresponding topics before using relevant functions of the meter.
• This mark indicates explanation, which is particularly important that the
user should read before using the meter.
Dangerous voltages.
Meter is protected throughout by double insulation or reinforced insulation.
When servicing, use only specified replacement parts.
Comply with IEC61010-1, 2nd edition
DANGER
DANGER
1