Mercury 10 TwoStroke Operation, Maintenance & Installation Manual page 72

• Steering Cable Grease Fitting (if equipped) ‑ Rotate steering wheel to
fully retract the steering cable end into the outboard tilt tube. Lubricate
through fitting.
a
2. Lubricate the following with Lightweight Oil
• Steering Link Rod Pivot Points ‑ Lubricate pivot points.
3. Lubricate the following with Quicksilver or Mercury Extreme Grease or
2‑4‑C with PTFE.
Tube Ref
Description
No.
Extreme Grease
2-4-C with PTFE
95
• Propeller Shaft ‑ Refer to Propeller Replacement for removal and
installation of the propeller. Coat the entire propeller shaft with
lubricant to prevent the propeller hub from corroding to the shaft.
MAINTENANCE
b
3045
Where Used
Propeller shaft
Propeller shaft
27344
62
a - Fitting
b - Steering cable end
3046
Part No.
8M0071842
92-802859A 1
eng