Mercury 10 TwoStroke Operation, Maintenance & Installation Manual page 66

3. Place a block of wood between gearcase and propeller to hold propeller
and remove propeller nut.
4. Pull propeller straight off shaft. If propeller is seized to the shaft and
cannot be removed, have the propeller removed by an authorized dealer.
5. Coat the propeller shaft with Quicksilver or Mercury Extreme Grease or
2‑4‑C with PTFE.
Tube Ref
Description
No.
Extreme Grease
2-4-C with PTFE
95
IMPORTANT: To prevent the propeller hub from corroding and seizing to the
propeller shaft (especially in saltwater), always apply a coat of the
recommended lubricant to the entire propeller shaft at the recommended
maintenance intervals, and also each time the propeller is removed.
MAINTENANCE
27296
27305
Where Used
Propeller shaft
Propeller shaft
56
27303
Part No.
8M0071842
92-802859A 1
eng