Mercury 10 TwoStroke Operation, Maintenance & Installation Manual page 45

3. Set the lanyard stop switch to RUN position. Refer to General
Information ‑ Lanyard Stop Switch.
4. Set the throttle grip to start position.
Throttle grip gear shift models
5. Remote control models ‑ Move on/off switch to the on position.
6. Side handle gear shift and remote control models ‑ Set the gear shift to
neutral position.
N
IMPORTANT: Outboards with battery charging capabilities must not be
operated with battery cables disconnected from the battery. Damage to the
charging system may result.
eng
OPERATION
19791
28577
N
R
26838
35
.
Side handle gear shift models
3026
F
3022
27170