ehang GHOSTDRONE 2.0 Operating Manual
Smart flight battery
Hide thumbs
Also See for GHOSTDRONE 2.0:
- Operating manual (48 pages) ,
- Manual (31 pages) ,
- Operating manual (28 pages)
Related Manuals for ehang GHOSTDRONE 2.0
Summary of Contents for ehang GHOSTDRONE 2.0
- Page 1 S M AR T F LIGH T B ATT ER Y OPERATING MANUAL GHOSTDRONE 2.0 created by EHang, Inc.
- Page 2 EHang shall not bear any liability or responsibility of the damage of the battery, the power adapter, the load, the copter or any other related accessories or...
- Page 3 ■Introduction The smart flight batter y is a LiPo 4S batter y specially designed for the GHOSTDRONE 2.0, with capacity of 4500 mAh, voltage of 14.8 V, charge-discharge management functionality and a smart display screen. The battery should only be charged by EHang power adapter.
- Page 4 Press the power button shortly, then quickly press and hold the button again. Don't release it until the last letter “G” of logo “EHANG” fully appears on the screen. The LED indica- tor light turns on once the battery is turned on, referring to the diagram below.
- Page 5 When the battery is powered on, press the power button once to enter the secondary interface, referring to the picture below: 16.66 4516 Seperate Chamber’s Voltage Electronic Current Number of Fully Battery Lifespan Charge and Percentage Discharge Cycle Secondary Interface ■Powering Off Press the power button shortly, then press and hold again until...
- Page 6 ■Battery Removal & Installation Remove Battery Turn off the battery first. Hold the battery handles to remove it from the battery compartment. Install Battery Hold the battery handles and push the battery into the battery compartment. Make sure the power blades in the compartment align with the battery interfaces.
-
Page 7: Battery Charging
■Battery Charging C o n n e c t t h e b a t t e r y t o t h e p o w e r a d a p t e r, a n d t h e n connect the power adapter to a wall socket (use the plug if necessary). - Page 8 ■Battery Discharging When the battery is discharging, the LED indicator light stays on and the screen displays as below: Remaining Battery Capacity Percentage Discharging Current Sum Voltage Accumulated Discharging Time Remaining Discharge Time Discharge Interface ■LED Indicator Light Instructions Low frequency flash (Green) Charging High frequency flash (Green) Low battery...
- Page 9 Warning 1. Only the EHang power adapter should be used to charge the battery. 2. DO NOT use the batteries from other companies. EHang is not responsible for any dangerous accidents caused by third party batteries. 3. DO NOT use used LiPo batteries. EHang is not responsible for any dangerous accidents caused by used batteries.
- Page 10 11. DO NOT use any conducting wires or any metallic substance that would cause battery short circuit. 12. DO NOT attempt to dismantle the battery case. DO NOT attempt to dismantle, pierce or cut a battery. 13. DO NOT discharge the battery below 3.0 V per cell. Ideally you never want to go below 3.2 V per cell to maintain a healthy battery.
-
Page 11: Storage Instructions
Storage Instructions 1. The battery should be stored in an environment with the temperature of 23±5°C. 2. The battery must be stored in places away from children, water, fire and metal. 3. Always keep a Class D fire extinguisher nearby your battery charging/discharging and storage area. -
Page 12: Specifications
■Specifications Weight 402 g Type LiPo 4S Voltage 14.8 V Battery Capacity 4500 mAh 67 Wh Operating Temperature -10°C ~ +40°C Maximum Charging Power 60 W Charging Time ≤70 min... - Page 13 But limited warranty is still provided. ■Contact Us Business Hour: Monday – Friday 9:00 A.M – 5:00 P.M (PST) Customer Service Phone: +1 650-533-8554 / 888-800-7056 Customer Service Email: support@ehang.com EHang, Inc. reserves all right to interpret this warranty.