ehang GHOSTDRONE 2.0 Operating Manual page 5

Battery Structural Diagram
LCD Screen Power Button Indicator Light
Powering On
Press the power button, then press and hold the button again in 3 seconds until the last
letter "G" of logo "EHANG" appears on the screen. The LED indicator light turns on once
the battery is turned on, referring to the diagram below.
Remaining Total Voltage
Battery Remaining Capacity
Battery Capacity Percentage
Main Interface
Note: When the battery is powered off, press the power button to check the battery life.
(Main interface will display for 3 seconds while the LED Indicator light stays off during
the whole process.)
When the battery is powered on, press the power button once to enter the secondary
interface, referring to the picture below:
Electronic Current
Battery Lifespan Percentage
Number of Fully Charge
and Discharge Cycle
Four Battery Chamer's Voltage
Secondary Interface
Powering Off
Press the power button, then press and hold again until the '!' of 'SEE YOU !' sign