ehang GHOSTDRONE 2.0 Operating Manual page 9

While Charging
The four LEDs next to the power button flash in sequence.
Fully Charged
The left side LED flashes while the right three LEDs on the right are solid.
Electric current
The number of flashing LEDs indicates G-BOX's power levels.
Switch/Battery Level Indicator Charging G-BOX (with battery charger)
Note: You can charge the G-Box by connecting it to a PC with a USB cable. When
charging through a USB adapter, the required input current is 500 mA or higher.
Procedure
Press the Power Button
iOS Indicator
Android Indicator
Indicator Status Explanation: Flash Off Solid
①Turn on G-BOX;
②Switch to iOS/Android;
③Communication indicator shows the status;
④ When G-BOX connects with mobile phone/tablet successfully, the communication
indicator shows the corresponding status.
Important Tip
Keep the G-BOX within your 3 meter's radius during flight (We suggest keeping it in
hand). If the G-BOX is not near you, you may lose connection with the GHOSTDRONE.
Best communication can be acquired when G-BOX's main antenna is pointing to the
GHOSTDRONE.