Westinghouse WFE911SB User Manual page 23

INSTALLATION OF THE APPLIANCE
Freestanding installation
The freestanding type installation uses the appliance as
supplied, and can be fitted in between cabinets, with
cabinets on one side or without adjacent cabinets. There
is no clearance requirement to adjacent side cabinets.
To ensure cooker stability, the anti-tilt bracket and chain
must must be attached to the appliance and the rear wall
for either fixed or flexible hose gas connection.
600mm minimum
vertical clearance
from combustible
surfaces
Adjusting the feet
The appliance is supplied with 4 adjustable feet. Attach
the feet to the bottom panel support by rotating
clockwise as shown in the figure.
For safe operation, it is important that your appliance is
safe and balanced. Make sure the appliance is level prior
to cooking. To increase the height of the appliance, turn
the inner part of the feet anti-clockwise. To decrease
the height of the appliance, turn the inner part of the
feet clockwise.
Once the legs are fitted it is possible to change the height
of the appliance from 875mm to 930mm by adjusting the
feet. The appliance is heavy and must only be lifted with
a minimum of two people. To avoid risk of damage never
drag the appliance.
900mm
minimum
600mm
600mm
Inner part
23
INSTALLATION