Avaya TransTalk MDW 9040 Installation And Use Manual page 79

Carrying Your Pocket Phone
Carrying Your Pocket Phone
The MDW 9040 Pocket Phone has a loop in the upper corner to accommodate the included lanyard. You can
attach the lanyard, as illustrated below, and slip the lanyard over your wrist to guard against dropping the phone.
A leather carrying case is also available separately; see
Parts."
Lanyard Loop
Fastening the Belt Clip
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
Programming & Using the MDW 9040 Pocket Phone
Figure 26. Attaching the Lanyard Loop to the Handset
<
>
Each battery pack (standard or extended) also comes with its own detachable clip that
you can attach to the back of the battery pack, enabling you to attach the phone to
your belt or purse strap. Be sure to use the clip that matches the battery pack; they are
not interchangeable.
To fasten the belt clip to the handset (or battery pack), refer to the following figure
and set of instructions.
Figure 27. Fastening the Belt Clip
(...then push
and snap)
Appendix D, "Ordering Replacement and Optional
and v Volume Control Buttons
^
Battery Pack
(outside)
Back of WT
5
(Latch...)
Belt Clip
71
Issue 2, February 2001