Taking Your Blood Pressure - AND UA-789AC Instruction Manual

Taking Your Blood Pressure

Adjusting the Built-in Clock
The UA-789 monitor has a built-in clock that gives you the time and date
and can tell you when a blood pressure reading stored in memory was
taken. We recommend that you adjust the clock prior to use. To adjust the
clock, follow these simple steps:
1. Press and hold the clock button until the digits start blinking.
2. To select the year, press and release the START button (to fast
forward, press and hold the START button). When the current year is
selected, set the year by pressing the clock button.
3. After the year is set, follow step 2 to set the month, day, hour (AM/PM)
and minute on the display screen.
NOTE: The clock will go back to January 1, 2007 at 12:00 once the batteries are removed for more
than 30 seconds.
E-6