Outdoor Unit Installation - Samsung RC090MHXEA Installation Manual

Installing the unit

Outdoor unit installation

The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration,
particularly if the outdoor unit is to be installed in a location exposed to strong winds or at a height, the unit must be fixed to
an appropriate support(wall or ground).
f Fix the outdoor unit with anchor bolts.
• The anchor bolt must be 20mm or higher from the base
surface.
NOTE
• When tightening the anchor bolt, tighten the rubber washer
to prevent the outdoor unit bolt connection part from
CAUTION
corroding.
• Make a drain outlet around the base for outdoor unit
drainage.
• If the outdoor unit is installed on the roof, you have to check
the ceiling strength and waterproof the unit.
Outdoor unit support
f Outdoor unit installed on the wall by rack
- Ensure the wall will be able to suspend the weight of rack and outdoor unit ;
- Install the rack close to the column as much as possible ;
- Install proper grommet in order to reduce noise and residual vibration transferred by outdoor unit towards wall.
When installing air guide duct
• Check and make sure that screws do not damage the copper pipe.
CAUTION
• Secure air guide duct on guard fan.
18
EHS mono_RC＊＊＊MHXGA_IM_E_34411A(3).indd 18
Designed to cut off residual vibration from
outdoor unit to rack. (not supplied with
product)
Soft rubber designed to cut off vibration
from rack to wall. (not supplied with
product)
Anchor bolt hole
620
940
Outdoor
unit
Anchor bolt
(Unit : mm)
Outdoor unit
support
Base surface
2012-11-26 오후 3:01:56