Installing The Unit - Samsung RC090MHXEA Installation Manual

Installing the unit

Moving the outdoor unit
f Select the moving route in advance.
f Be sure that moving route is safe from weight of the outdoor unit.
f Do not slant the product more than 30˚when carrying it. (do not lay the product down sideways)
f The surface of the heat exchanger is sharp. Be carefule not to be injured while moving and installing.
Moving the outdoor unit by wire rope
f Fasten the outdoor unit by two 8m or longer wire ropes as shown at the
figure. To prevent from damage or scratches, insert a piece of cloth between
the outdoor unit and rope, then move the unit.
Moving the outdoor unit with a fork lift
f Insert the fork into the wooden pallet at the bottom of the outdoor unit
carefully. Be careful that the fork does not damage the outdoor unit.
EHS mono_RC＊＊＊MHXGA_IM_E_34411A(3).indd 13
Wire rope
Plate protection
cloth
❋ The appearance of the unit may be
differ ent from the picture depending
on the model.
Wooden pallet
Fork lift
2012-11-26 오후 3:01:54
13