Huawei IPC6122-P Configuration Manual page 90

IPC6122-P
Configuration Guide
Procedure
Step 1 Choose Settings > System Configuration > Storage Management.
The Storage Management page is displayed, as shown in
Figure 12-11 Storage Management tab page
Step 2 Set parameters. For detailed parameter description, see
Table 12-3 Parameter description
Parameter
Storage
management
Continuous recording
Rate limit
Issue 02 (2016-04-06)
No SD card
SD card status
Instant formatting
SD card refresh
Enable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 12-11.
Table 12-3.
Description
Indicates there is no SD card on the IPC.
Displays the total capacity and occupied space
of an SD card.
Formats an SD card.
NOTE
l Before using an SD card, format it.
l Back up data before formatting an SD card.
l All data will be lost after an SD card is
formatted. Exercise caution when performing
this operation.
l Do not remove an SD card when it is being
formatted or data-written.
l Format an SD card during off-peak hours.
Obtains the latest SD card status.
Enables or disables the continuous video
recording function. The recorded video is
stored in the SD card.
NOTE
You can format the SD card when Continuous
recording is enabled.
Indicates whether to enable the storage upload
rate limit function.
NOTE
When the camera is uploading buffered video to the
video surveillance platform, you cannot modify
Rate limit.
12 Managing the System
85