Huawei IPC6122-P Configuration Manual page 50

IPC6122-P
Configuration Guide
Figure 6-8 Motion detection Parameters tab page
Step 2 To enable motion detection, select Enable.
Step 3 Click Add.
A motion detection area is displayed on the live video image.
l You can add only one motion detection area at a time. If you need to add more motion detection areas,
l A maximum of four motion detection areas can be added.
Step 4 Use the mouse to adjust the location and size of the motion detection area.
Step 5 Set parameters. For detailed parameter description, see
Table 6-5 Parameter description
Parameter
Alarm check interval
Sensitivity
Step 6 Click Save.
Issue 02 (2016-04-06)
NOTE
click Add again.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Time interval at which the system checks for new alarms. The
system then reports detected alarms to the surveillance platform.
NOTE
l The MTU value is an integer ranging from 1 to 256. The default
value of is 5.
l Only one alarm is reported if an object keeps moving in the
surveillance range of the camera within a single alarm check interval.
This is to avoid repeated alarms.
Indicates the sensitivity of motion detection.
NOTE
l The MTU value is an integer ranging from 1 to 5. The default value
of is 3.
l A larger value indicates higher sensitivity. To detect slight motion, it
is recommended that you set the sensitivity to a larger value.
6 Setting Video Parameters
Table 6-5.
45