Huawei IPC6122-P Configuration Manual page 37

IPC6122-P
Configuration Guide
Figure 6-1 Video&Audio Stream Parameters page
Step 2 Set video stream parameters. For detailed parameter description, see
Table 6-2 Parameter description
Parameter
Stream type
Mirroring mode
Corridor mode
Issue 02 (2016-04-06)
Description
Set the stream type based on the site requirements. The options
are as follows:
l Primary stream: The primary stream is large in size and
provides clear video while occupying large bandwidth, so it is
used in local storage.
l Secondary stream: The secondary stream provides smooth
video, occupies small bandwidth, and is used for data
transmission on low-bandwidth networks.
NOTE
The IPC currently supports dual-stream output only.
When the mirroring mode is enabled, you can reverse video
images. The options are as follows:
l Close: The mirroring mode is disabled.
l Horizontal reversion: Video images can be reversed left to
right.
l Vertical reversion: Video images can be reversed upside
down.
l All: Video images can be reversed upside down and left to
right.
When the corridor mode is enabled, you can reverse video
images by 90 degrees to obtain the aspect ratio 9:16 or 3:4.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Setting Video Parameters
Table 6-2.
32