Huawei IPC6122-P Configuration Manual page 34

IPC6122-P
Configuration Guide
Button
Issue 02 (2016-04-06)
Function
Click to enable the rain wiper, or click it again to disable the rain
wiper.
NOTE
This button is available only when you select the Wiper linkage switch
output 1 check box on the PTZ&Serial Port Parameters page.
Control the PTZ rotation and the zoom adjusted speed in any of
the following ways (a larger value indicates a higher speed):
l Drag the slider.
l Click or .
l Enter a value in the text box. The value ranges from 1 to 10.
Set the start horizontal coordinate of the PTZ device to the
coordinate of the current horizontal position where the PTZ
device locates.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 PTZ Control
29