Huawei IPC6122-P Configuration Manual page 70

IPC6122-P
Configuration Guide
Figure 8-4 Preset Parameters page
l Home position is a special preset to which a pan-tilt-zoom (PTZ) camera automatically rotates if users do
l The preset position numbered 0 is the home position by default. You can move the camera to a specified
l If no home position is configured, the name displayed is Home (Not set). If a home position is
l Home position cannot be deleted.
Step 2 Adjust the PTZ and determine a preset position.
Step 3 Click Add.
The page for Add Preset is displayed.
Step 4 Select a preset number and enter a name for the preset position.
A preset name contains a maximum of 31 characters including Chinese characters, letters,
digits, and other characters visible on the keyboard.
A Chinese word occupies three characters in this Web page. If you attempt to set the preset name to Chinese
words, the preset name can contain a maximum of 10 Chinese words.
Step 5 Click Save.
The added preset position is displayed in the preset position list.
l To modify or delete a preset position, select it and click Setting or Delete.
l To delete all preset positions, click Delete all.
l You cannot delete an enabled home position or a preset position in a tour track.
----End
Issue 02 (2016-04-06)
NOTE
not control the rotation direction of the camera within a specified period.
position through the PTZ control panel and set the position as the home position.
configured, the name displayed is Home (Custom location).
NOTE
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Setting PTZ Control Parameters
65