Figure 43. Inserting the metal bracket into the plastic frame of the converter
c. Push the metal bracket down until the tab
storage drive forward as shown until the tab
Figure 44. Installing the metal bracket into the plastic frame of the converter
d. Flex both sides of the plastic bracket and align pins
holes in the plastic frame of the converter.
Notes:
• Ensure that the circuit board faces downward and the connectors face toward the rear of the
bracket.
• Do not touch the circuit board on the storage drive during operation.
88
P320 Hardware Maintenance Manual
1
is slightly curved. Then, push the bracket with the
1
snaps into position.
1
on the plastic bracket with the corresponding