Chapter 6. Advanced Configuration; Using The Setup Utility Program; Starting The Setup Utility Program; Changing The Display Language Of The Setup Utility Program - Lenovo ThinkStation P320 Hardware Maintenance Manual

Chapter 6. Advanced configuration

This chapter provides information to help you further configure the computer.

Using the Setup Utility program

The Setup Utility program is used to view and change the configuration settings of your computer. This
section provides information about only the major configuration settings available in the program.
Note: The operating system settings might override any similar settings in the Setup Utility program.

Starting the Setup Utility program

To start the Setup Utility program, do the following:
1. Turn on or restart your computer.
2. Before Windows starts up, repeatedly press and release F1 or Fn+F1 (depending on the keyboard) until
the Setup Utility program opens. If a BIOS password has been set, the Setup Utility program will not
open until you enter the correct password. For more information, see "Using BIOS passwords" on page
42.
To view and change the configuration settings, follow the instructions on the right side of the screen. The
keys used to perform various tasks are displayed at the bottom of the screen.

Changing the display language of the Setup Utility program

The Setup Utility program supports three display languages: English, French, and simplified Chinese.
To change the display language of the Setup Utility program, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 39.
2. From the main interface, locate System Language, and select the display language according to your
needs.

Enabling or disabling a device

This section provides information about how to enable or disable user access to hardware devices (such as
USB connectors or storage drives).
To enable or disable a device, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 39.
2. Select Devices.
3. Select the device you want to enable or disable and press Enter.
4. Select the desired setting and press Enter.
5. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard
settings). Then, select Yes in the window displayed, and press Enter.

Enabling or disabling the automatic power-on of your computer

The Automatic Power On item in the Setup Utility program provides various options for you to make your
computer start up automatically.
© Copyright Lenovo 2017
39