Figure 28. Pivoting the drive bay assembly upward
4. Depending on whether you are installing or replacing an optical drive, do one of the following:
• If you are installing a new optical drive, do the following:
a. Remove the metal static shield from the bay.
b. Locate the optical-drive retainer from the left side of the computer. Push the optical-drive retainer
downwards to unlock the retainer. Then lift the optical-drive retainer out of the chassis.
• If you are replacing an optical drive, do the following:
a. Disconnect all cables from the rear of the optical drive.
b. Press the optical-drive lock
drive out of the rear of the bay. Then remove the optical-drive retainer from the left side of the
optical drive.
1
on the right side of the drive bay assembly and slide the optical
.
Chapter 8
Hardware removal and installation
81