Table Of Contents - Chelsio Communications Chelsio T5 Installation And User Manual

I. CHELSIO UNIFIED WIRE
1. Introduction
1.1. Features
1.2. Hardware Requirements
1.3. Software Requirements
1.4. Package Contents
2. Hardware Installation
3. Software/Driver Installation
3.1. Pre-requisites
3.2. Installing Chelsio Unified Wire from source
3.3. Installing Chelsio Unified Wire from RPM
3.4. Firmware update
4. Software/Driver Uninstallation
4.1. Uninstalling Chelsio Unified Wire from source
4.2. Uninstalling Chelsio Unified Wire from RPM
5. Configuring Chelsio Network Interfaces
5.1. Configuring 40G adapters
5.2. Configuring network-scripts
5.3. Creating network-scripts
5.4. Checking Link
6. Performance Tuning
7. Software/Driver Update
II. NETWORK (NIC/TOE)
1. Introduction
1.1. Hardware Requirements
1.2. Software Requirements
2. Software/Driver Loading
2.1. Loading in NIC mode (without full offload support)
2.2. Loading in TOE mode (with full offload support)
3. Software/Driver Unloading
3.1. Unloading the NIC driver
3.2. Unloading the TOE driver
4. Software/Driver Configuration and Fine-tuning
4.1. Instantiate Virtual Functions (SR-IOV)
4.2. Enabling Busy waiting
4.3. Performance Tuning
III. VIRTUAL FUNCTION NETWORK (VNIC)
Chelsio T5/T4 Unified Wire for Linux

TABLE OF CONTENTS

12
13
13
14
14
15
18
21
22
22
33
35
37
37
41
43
43
45
45
46
47
48
49
50
50
51
52
52
52
53
53
53
55
55
55
56
62
iv