Software/Driver Loading - Chelsio Communications Chelsio T5 Installation And User Manual

Unified wire adapters for linux

Hide thumbs Also See for Chelsio T5:

Table of Contents

Chapter XIV. UDP Segmentation Offload and Pacing

2. Software/Driver Loading

Please ensure that all inbox drivers are unloaded before proceeding with

unified wire drivers.

The driver must be loaded by the root user. Any attempt to load the driver as a regular user will

Run the following commands to load the driver:

[root@host~]# modprobe cxgb4

[root@host~]# modprobe t4_tom

Though normally associated with the Chelsio TCP Offload engine, the t4_tom module is

required in order to allow for the proper redirection of UDP socket calls.

Chelsio T5/T4 Unified Wire for Linux

Do you have a question about the Chelsio T5 and is the answer not in the manual?