Chelsio Communications Chelsio T5 Installation And User Manual page 32

Chapter I. Chelsio Unified Wire

To build and install all drivers with DCB support:
[root@host~]# make dcbx=1
[root@host~]# make dcbx=1 install

The offload drivers support UDP Segmentation Offload with limited number of connections
(1024 connections).To build and install UDP Offload drivers which support large number of
offload connections (approx 10K):
[root@host~]# make udp_offload
[root@host~]# make udp_offload_install

To build and install FCoE Target drivers:
[root@host~]# make fcoe_pdu_offload_target
[root@host~]# make fcoe_pdu_offload_target_install

The default T5/T4 configuration tuning option is Unified Wire. The configuration tuning can
be selected using the following commands:
[root@host~]# make CONF=<T5/T4 configuration> <Build Target>
[root@host~]# make CONF=<T5/T4 configuration> <Install Target>

To build and install drivers along with benchmarks:
[root@host~]# make BENCHMARKS=1
[root@host~]# make BENCHMARKS=1 install

Unified Wire Manager will be installed by default. To skip the installation:
[root@host~]# make INSTALL_UM=0 install
Chelsio T5/T4 Unified Wire for Linux
Page 32