Legacy - Chelsio Communications Chelsio T5 Installation And User Manual

Unified wire adapters for linux

Hide thumbs Also See for Chelsio T5:

Table of Contents

Chapter XXI. Unified Boot

Legacy

In BIOS, configure the system having Chelsio CNA to boot in Legacy mode.

Once the system boots from the USB flash drive, change your working directory to

CHELSIO directory:

C:\>cd CHELSIO

iii. Run the following command to list all Chelsio CNAs present on the system. The list displays

a unique index for each CNA found.

C:\CHELSIO>cfut4 –l

Chelsio T5/T4 Unified Wire for Linux

Do you have a question about the Chelsio T5 and is the answer not in the manual?