Introduction; Hardware Requirements; Software Requirements - Chelsio Communications Chelsio T5 Installation And User Manual

Unified wire adapters for linux

Hide thumbs Also See for Chelsio T5:

Table of Contents

Chapter XII. Offload Bonding driver

1. Introduction

The Chelsio Offload bonding driver provides a method to aggregate multiple network interfaces

into a single logical bonded interface effectively combining the bandwidth into a single

connection. It also provides redundancy in case one of link fails.

The traffic running over the bonded interface can be fully offloaded to the T5/T4 Adapter, thus

freeing the CPU from TCP/IP overhead.

1.1.1. Supported Adapters

The following are the currently shipping Chelsio Adapters that are compatible with the Chelsio

Offload Bonding driver:

1.2.1. Linux Requirements

Currently the Offload Bonding driver is available for the following versions:

RHEL 7.2, 3.10.0-327.el7 *

RHEL 7.1, 3.10.0-229.el7

RHEL 6.7, 2.6.32-573.el6*

RHEL 6.6, 2.6.32-504.el6*

RHEL 6.5, 2.6.32-431.el6*

Chelsio T5/T4 Unified Wire for Linux

Do you have a question about the Chelsio T5 and is the answer not in the manual?