Reversing Channel Setup - UBSAN Q4 FPV Instruction Manual

8.6 REVERSING CHANNEL SETUP

If you would like to reverse any of the stick functions due to personal preference then follow
the instructions below. Be aware that it will change the controls back to front.
Pull the throttle stick to the lowest position and long press the Pitch stick simultaneously to
enter into MAIN MENU interface. Push the Elevator stick up/down to select "Set Reverse".
Select "Exit" to exit.
0:08:49
MAIN MENU
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
8.7 SENSITIVITY SETUP
If you would like to change the sensitivity of any of the stick functions then follow the
instructions below.
Pull the throttle stick to the lowest position and long press the Elevator stick to enter into
the MAIN MENU interface. Push the Elevator stick up/down to select "Set Sensitivity", push
the tick right to enter into the " Set Sensitivity" interface, select "Expert mode" or " Normal
mode". Select" Exit" to exit.
0:08:49
MAIN MENU
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
Sensitivity default setting is in Normal Mode.
0:08:49
Set Reverse
Exit
Elevator Normal
Aileron Revers
Rudder Normal
0:08:49
Set Sensitive
Exit
Normal mode
Elevator :
Aileron :
Rudder :
50
50
50
©
17
2015 Hubsan
哈博森科技 版权所有