Headless Mode - UBSAN Q4 FPV Instruction Manual

7.2 HEADLESS MODE

Headless mode means the X4 will default any direction (corresponding to the directions
of transmitter sticks) as its up head when the mode is activated.
Press the Throttle stick 0.5 second to switch on/ off headless mode.
Press the stick to enter into the headless Mode, indicated by one "beep" and the front
LED will blink slowly .
Press the stick again to exit headless Mode, indicated by one "beep".
7.3 AERIAL FLIP
Press and hold down the Throttle stick for 1.5 seconds to enter Flip Mode, indicated by
"beeps".
The beeps will last for 2 seconds. In this 2 seconds, push the accordance sticks to perform
the flips.
7.3.1 Left Flip
Push the Aileron stick to the left. Release the stick to the center position after the flip.
MODE 2
MODE 1
MODE 1
MODE 2
11
©
2015 Hubsan
哈博森科技 版权所有