Using Info Exists To Check Whether A Variable Exists; More About Math Expressions - Newport XPS-Q8 Manual

XPS-Q8
2.2.9.3

Using info exists to check whether a variable exists

The existence of a variable can be tested with the
example, because
existence of the variable first.
Example 1–17: Using info to determine if a variable exists.
if {![info exists
set foobar 0
} else {
incr foobar
}
2.2.10

More about Math Expressions

This section describes a few of the finer points about mathematics in Tcl scripts. In Tcl
7.6 and earlier versions math is not very efficient due to required conversions between
strings and numbers. The
numbers. It then does computations with double precision floating point values. The
result is formatted into a string that have, by default, 12 significant digits. This number
can be changed by setting the tcl_precision variable to the number of significant
digits desired. Typically seventeen digits of precision are enough to insure that no
information is lost when converting back and forth between a string and an IEEE double
precision number:
Example 1–18: Controlling precision with tcl_precision.
expr 1 / 3
⇒ 0
expr 1 / 3.0
⇒ 0.333333333333
set tcl_precision
⇒ 17
expr 1 / 3.0
# The trailing 1 is the IEEE rounding digit
⇒ 0.33333333333333331
In Tcl 8.0 and later versions, the overhead of conversions is eliminated in most cases by
the built-in compiler. Nevertheless, Tcl was not designed to support math-intensive
applications. There is support for string comparisons by expr, so you can test string
if
values with
doing a string comparison:
if {$answer == "yes"} { ... }
However, the
reliable because
Expressions can include variable and command substitutions and still be grouped with
curly braces. This is because an argument to
substitution: one by the Tcl interpreter, and a second by
not a problem because math values do not contain the characters that are special to the
Tcl interpreter. The second round of substitutions is needed to support commands like
while if
and
Grouping expressions can make them run more efficiently.
You should always group expressions in curly braces and let
command and variable substitutions. Otherwise, your values may suffer extra
conversions from numbers to strings and back to numbers. Not only is this process
slow, but the conversions can loose precision in certain circumstances. For example,
suppose x is computed from a math function:
incr
requires that a variable exist, you might have to test for the
foobar]} {
expr
command must convert arguments from strings to
17
statements. You must use quotes so that
string
compare and
expr
may do conversions on strings that look like numbers.
that use the expression evaluator internally.
11
info exists
expr
knows that you are
string equal
commands are more
expr
is subject to two rounds of
expr
itself. Ordinarily this is
expr
EDH0307En1041 — 10/17
Tcl Manual
command. For
take care of