Cisco ASR 900 Series Configuration Manual page 98

Performance Monitoring Use Cases or Deployment Scenarios
Data in current interval (360 seconds elapsed):
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
388 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
Data in current interval (360 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
361 Unavail Secs, 0 Stuffed Secs
Data in current interval (360 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
360 Unavail Secs, 0 Stuffed Secs
The complete output for the show controller command is described as:
Router#show controllers sonet 0/0/16
SONET 0/0/16 is down.
Hardware is
Port configured rate: OC3
Applique type is Channelized Sonet
Clock Source is Line
Medium info:
Type: Sonet, Line Coding: NRZ,
SECTION:
LOS = 1
SONET/SDH Section Tables
INTERVAL
09:52-09:52
LINE:
AIS = 0
Active Defects: None
Detected Alarms: SLOS SLOF LAIS
Asserted/Active Alarms: SLOS
Alarm reporting enabled for: SLOS SLOF SF B2-TCA
BER thresholds:
TCA thresholds:
Rx: S1S0 = 00
K1 = 00,
J0 = 00
RX S1 = 00
Tx: S1S0 = 00
K1 = 00,
J0 = 00
SONET/SDH Line Tables
INTERVAL
09:52-09:52
High Order Path:
PATH 1:
Clock Source is internal
AIS = 0
LOP = 0
LOM = 0
Active Defects: None
Detected Alarms: PAIS
Asserted/Active Alarms: None
Alarm reporting enabled for: PLOP LOM B3-TCA
TCA threshold:
1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco
IOS XE Fuji 16.7.x (Cisco ASR 900 Series)
86
A900-IMA3G-IMSG
LOF = 0
CV ES SES SEFS
0 0 388 0
RDI = 0 REI = 0
SF = 10e-3 SD = 10e-6
B2 = 10e-6
K2 = 00
K2 = 00
CV ES SES UAS
0 0 0 388
RDI = 0 REI = 0
PSE = 0 NSE = 0
PLM = 0 UNEQ = 0
B3 = 10e-6
Configuring SONET
BIP = 0
BIP(B2) = 0
BIP(B3) = 0
NEWPTR = 0