Configuring Support of 1 port OC-48/ 4 port
OC-12/OC-3 + 12 port T1/E1 + 4 port T3/E3 CEM
Interface Module
The 1 port OC-48/ 4 port OC-12/OC-3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module has 12XDS1,
4XDS3, electrical interfaces, and 4XSFP ports that can provide multiple functions such as 1XOC-48/12/3
and 3XOC-12/3. The maximum speed supported on OCx ports is OC-48. The interface module supports a
maximum of 3G CEM traffic.
Note
OCx Port License should be enabled for the configuration.
•
•
•
•
•
•
•
•
Restrictions of Feature Support on 4 Port OC48/OC12/OC3 + 12
Port T1/E1 + 4 Port T3/E3 CEM Interface Module
• CESoP is not supported.
• Mixed mode support, for example, DS1 and E1 or DS3 and E3 or SONET and SDH simultaneously on
Restrictions of Feature Support on 4 Port OC48/OC12/OC3 + 12 Port T1/E1 + 4 Port T3/E3 CEM
Interface Module, page 1
Port Licensing, page 2
Uninstalling a License, page 4
Enabling T1 Controller, page 4
Enabling T3 Controller, page 5
Enabling SONET Controller, page 5
Associated Commands, page 5
Additional References , page 5
different ports is not available.
1 port OC48/ 4 port OC12/OC3 + 12 port T1/E1 + 4 port T3/E3 CEM Interface Module Configuration Guide, Cisco IOS
1
C H A P T E R
XE Fuji 16.7.x (Cisco ASR 900 Series)
1