Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11DPFR-S(N) User Manual

X11DPFR-S(N) User's Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips
Screwdriver
(1)

Tools Needed

Location of Mounting Holes

Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips
Screws (12)
VGA
UID_LED1
USB0/1 (3.0) IPMI_LAN1
COM1
LED1
BMC_HB_LED1
BMC
BIOS
JPP1/JTAG SCAN JSIOM1
JPP0/JTAG SCAN
JSDCARD1
PCH
JBT1
+
1
JRK1
JS2
BT1
X11DPFR-S(N)
DESIGNED IN USA
REV:1.00
JS1
CPU1
CPU2
FAN1 FAN3
FAN2
22
Standoffs (12
JPWR10
JPWR9
JPWR_HDD2
JPWR_HDD1
JNVME1
JNVME3
JNVME2
JNVME4
JPWRBT1