Reference Information; Default Setting Values; Function List; Ethernet] Port - Icom AP-3 Instruction Manual

REFERENCE INFORMATION

14-1 Default Setting Values

The original factory setting values are listed below for each setting screen of the
AP-3 unit.
[Wireless LAN Settings] screen
Wireless LAN Settings
• ESS ID: LG (alphanumeric characters, upper
case)
SL-1100 Advanced Settings
SL-1100 Settings
• Channel: 11
• Security level: None
MAC Address Security Setting
• Use MAC Address Security: No
[AP-3 Network Settings] screen
Routing Mode Setting
• Use Routing Mode: No
AP-3 IP Address Settings
Wired LAN
• IP Address: 192.168.0.1
• Subnet Mask: 255.255.255.0
Wireless LAN
• IP Address: 192.168.1.1
• Subnet Mask: 255.255.255.0

14-2 Function List

• Wireless access point function
• Wireless roaming function
• Wireless security
(ESS ID, MAC address, WEP)
• Routing protocol
TCP/IP (RIP static)

14-3 [ETHERNET] Port

DHCP Server Settings
• Use DHCP Server Function: Yes
• Lease Time: 3 days
Wired LAN
• Initial Allocation IP Address: 192.168.0.10
• Subnet mask: 225.225.225.0
• Number of Allocations : 30
Wireless LAN
• Initial Allocation IP Address: 192.168.1.10
• Subnet mask: 225.225.225.0
• Number of Allocations: 30
[Routing Settings] screen
RIP Setting
• Use RIP: Yes
[AP-3 Management Settings] screen
SYSLOG Settings
• Use DEBUG: Yes
• Use INFO: Yes
• Use NOTICE: No
• Facility: 1
• DHCP server function
• DHCP static function
• Supports SYSLOG
• Remote setup (web browser)
• Firmware Update
One RJ-45 modular jack (8-pin)
1 2 3 4 5 6 7 8
14
1. Send (+)
2. Send (–)
3. Receive (+)
4. Not used
5. Not used
6. Receive (–)
7. Not used
8. Not used
73