Saving Setting Data - Icom AP-3 Instruction Manual

SAVING AND UPLOADING SETTING DATA

9-2 Saving Setting Data

[Note]
This explanation is based on
Internet Explorer 5.0 for
Windows.
Follow the procedure below to save the current set-
ting data as an HTML file onto a floppy disk or the
hard disk of the computer being used to access the
AP-3.
1. Connect a setting terminal (wired or wireless) to the
AP-3.
2. Start up the web browser of the setting terminal.
3. Access the setting screen of the AP-3.
4. Click [Save Settings] in the setting screen selection
area.
• The [Save Settings] screen is displayed as shown
below.
5. Select [Save as] from the [File] menu of the web brows-
er.
6. Designate the directory in the [Save in] text box and
enter a filename in the text box.
7. Select [HTML file] under [Save as type].
* Select JIS if your browser offers a selection of kanji
codes for the file.
8. Click the <Save> button.
• The setting data is stored in the designated location.
* The file extension will be htm or html.
* The file will not have an extension if saved on a
Macintosh.
9
61