Syslog Settings - Icom AP-3 Instruction Manual

SYSLOG settings

q Use DEBUG··············
w Use INFO ··················
e Use NOTICE ·············
r Host Address ···········
t Facility ······················
When log information and the like is managed using SYS-
LOG host, the information can be managed collectively as
a file using the SYSLOG function. These SYSLOG set-
tings are used to select what information will be output as
part of the SYSLOG.
q
w
e
r
t
This setting item is for selecting whether or not debug
information will be output as part of the SYSLOG.
This setting item is for selecting whether or not INFO type
messages will be output as part of the SYSLOG.
This setting item is for selecting whether or not NOTICE
type messages will be output as part of the SYSLOG.
When the SYSLOG function will be used, enter the
address of the host that will receive the SYSLOG.
The host must support SYSLOG server functions.
Enter the SYSLOG facility.
Set to a value from 0 to 23.
This setting item is normally set to "1."
SETTING SCREENS
(default value: Yes)
(default value: Yes)
(default value: No)
(default value: 1)
8
59