Saving And Uploading Setting Data; Save Settings] Screen - Icom AP-3 Instruction Manual

9

SAVING AND UPLOADING SETTING DATA

9-1 [Save Settings] Screen

q <Register to AP-3>
button ·······················
w <Undo> button·········
e <Return to Menu>
button ·······················
r Display area ·············
60
The [Save Settings] screen is used to copy setting
data from the AP-3 to a floppy disk or the hard disk of
a computer and to upload setting data from a com-
puter to the AP-3.
q
This button is used to copy the setting data shown on the
[Save Settings] screen to the setting screen of the AP-3.
This button is used to undo any changes made to the set-
ting data shown on the [Save Settings] screen and return
the data to the state it was in when the file was first
opened.
This button is used to return to the [Wireless LAN
Settings] screen.
When the [Save Settings] screen is opened from the AP-
3 setting screen, the current setting data is displayed in
this area.
When the [Save Settings] screen is opened from a data
file according to the procedure in "9-3 Uploading Setting
Data" ( p. 62), the setting data stored in the data file is
displayed.
w e
r