IBM Storwize V7000 Maintenance Manual page 144

128
Storwize V7000: Troubleshooting, Recovery, and Maintenance Guide
Table 26. Error event IDs and error codes (continued)
Event Notification
ID type Condition
071510 E Detected memory size does not match the expected
memory size.
071523 W The internal disk file system of the node is damaged.
071524 E Unable to update the BIOS settings.
071525 E Unable to update the service processor firmware of the
system board.
071535 E The internal PCIe switch of the node canister failed.
071550 E Cannot form cluster (system) due to lack of resources.
071556 E Duplicate WWNN detected on the SAN.
071562 E The node hardware does not meet the minimum
requirements.
071564 W Too many software failures.
071565 E The internal drive of the node is failing.
071573 E The node software is inconsistent.
071574 E The cluster (system) data cannot be read.
071578 E The cluster (system) data was not saved when power
was lost.
071671 E There is not enough battery available to start the node.
Two batteries are charging.
071672 E There is not enough battery available to start the node.
One battery is charging.
071673 E There is not enough battery available to start the node.
No batteries are charging.
071690 W Node held in service state.
071820 W Node canister has the incorrect model for the enclosure.
071840 W Detected hardware is not a valid configuration.
071841 W Detected hardware needs activation.
072900 E There was a PCIe link failure between canisters.
072901 E The PCIe link is degraded between canisters.
072911 E The PCIe link for the CPU is degraded.
073003 E The Fibre Channel ports are not operational.
073005 E Cluster (system) path failure.
073006 W The SAN is not correctly zoned. As a result, more than
512 ports on the SAN have logged into one Storwize
V7000 port.
073007 W There are fewer Fibre Channel ports operational than are
configured.
073305 W One or more Fibre Channel ports are running at a speed
that is lower than the last saved speed.
073310 E A duplicate Fibre Channel frame has been detected,
which indicates that there is an issue with the Fibre
Channel fabric. Other Fibre Channel errors might also be
generated.
Error
code
1032
1187
1034
1032
1034
1192
1133
1036
1188
1032
1187
1032
1194
1192
1192
1192
1189
3020
1198
1199
1006
1052
1034
1060
1550
1800
1061
1065
1203