IBM Storwize V7000 Maintenance Manual page 142

Table of Contents

Advertisement

|
| | |
|
|
| | |
|
126
Storwize V7000: Troubleshooting, Recovery, and Maintenance Guide
Table 26. Error event IDs and error codes (continued)
Event
Notification
ID
type
Condition
045058
E
An enclosure battery is at end of life.
045062
W
An enclosure battery conditioning is required but not
possible.
045063
E
There was an enclosure battery communications error.
045064
W
A SAS port is active, but no enclosures can be detected.
045065
E
There is a connectivity problem between a canister and
an enclosure.
045066
E
The FRU identity of the enclosure is not valid.
045067
W
A new enclosure FRU was detected and needs to be
configured.
045068
E
The internal device on a node canister was excluded
because of too many change events.
045069
E
The internal connector on the node canister was
excluded as the cause of single ported drives.
045070
W
The canister temperature sensor cannot be read.
045071
W
The enclosure contains both a node canister and an
expansion canister.
045072
E
The discovery failed to complete.
045073
E
The VPD for the enclosure cannot be read.
045080
E
There are too many self-initiated resets on the enclosure.
045082
E
The slots are powered off.
050001
W
The relationship is stopped because of a clustered system
or complete I/O group failure, and the current state of
the mapping could not be recovered.
050002
W
A Metro Mirror or Global Mirror relationship or
consistency group exists within a clustered system, but
its partnership has been deleted.
050010
W
A Global Mirror relationship has stopped because of a
persistent I/O error.
050011
W
A remote copy has stopped because of a persistent I/O
error.
050020
W
A Metro Mirror or Global Mirror relationship has
stopped because of an error that is not a persistent I/O
error.
050030
W
There are too many cluster (system) partnerships. The
number of partnerships has been reduced.
050031
W
There are too many cluster (system) partnerships. The
system has been excluded.
060001
W
The thin-provisioned volume copy is offline because
there is insufficient space.
060002
W
The thin-provisioned volume copy is offline because the
metadata is corrupt.
060003
W
The thin-provisioned volume copy is offline because the
repair has failed.
Error
code
1113
1131
1116
1005
1036
1008
1041
1034
1034
1034
1037
1048
1048
1048
1048
1700
3080
1920
1915
1720
1710
1710
1865
1862
1860

Advertisement

Table of Contents
loading

Table of Contents