IBM Storwize V7000 Maintenance Manual page 140

124
Storwize V7000: Troubleshooting, Recovery, and Maintenance Guide
Table 26. Error event IDs and error codes (continued)
Event Notification
ID type Condition
010097 E A drive is reporting excessive errors.
010098 W There are too many drives presented to a cluster
(system).
020001 E There are too many medium errors on the managed disk. 1610
020002 E A managed disk group is offline.
020003 W There are insufficient virtual extents.
029001 W The managed disk has bad blocks.
029002 E The system failed to create a bad block because MDisk
already has the maximum number of allowed bad
blocks.
029003 E The system failed to create a bad block because the
clustered system already has the maximum number of
allowed bad blocks.
030000 W The trigger prepare command has failed because of a
cache flush failure.
030010 W The mapping is stopped because of the error that is
indicated in the data.
030020 W The mapping is stopped because of a clustered system or
complete I/O group failure, and the current state of the
relationship could not be recovered.
045001 E One or more power supply unit fans have failed.
045002 E A fan is operating outside the expected range.
045003 E There was a fan status communications failure.
045004 E The power supply unit is not installed.
045005 W The power supply unit has indicated an input power
failure.
045006 E The power supply unit has indicated a dc failure.
045007 E The power supply unit has failed.
045008 E There is no communication with the power supply unit.
045009 E The model type for this enclosure is not valid.
045010 E The power supply unit type is unknown to this product.
045011 E The power supply unit serial number is not valid.
045012 W The canister temperature is at the warning level.
045013 W The canister temperature is at the critical level.
045014 E The SAS cable was excluded because of a missing device. 1260
045015 E A SAS cable was excluded because too many change
events were caused.
045016 E A SAS cable was excluded.
045017 E A SAS cable is operating at a reduced speed.
045018 E A SAS cable was excluded because frames were dropped. 1260
045019 E A SAS cable was excluded because the enclosure
discovery timed out.
045020 W A SAS cable is not present.
Error
code
1685
1200
1620
2030
1840
1226
1225
1900
1910
1895
1124
1126
1126
1128
1138
1126
1124
1148
1124
1124
1124
1098
1095
1260
1255
1260
1260
1265