GRAPHTEC GL2000 Quick Start Manual page 9

10
. REVIEW
This key is used to replay captured data.
During Free Running, captured data is replayed.
During capturing, captured data is replayed.
(Data replay Source is displayed on the status display. Press again to return to the
capturing data screen.)
To exit the replay display, press the [Quit] key.
11
. DISPLAY
This key is used to switch the screen mode. Press this key to show the following screen.
When running Free Running
Displays the Y-T waveform + Digital display> All waveform screen> Logging display+Real
time statistical calculation screen > XY screen
12
. CURSOR(ALARM CLEAR)
Press this key during replay to switch between cursors A and B.
When the alarm setting is set to "Hold generated Alarm", the alarm is cleared.
13
. FILE
This key is used to perform the file-related operations.
14
. FUNC
Take a shortcut with the key by selecting the frequently used function in advance.
For details of function operation, refer to "3.5 Setting Menus" - "(6) OTHER settings" - "FUNC
key settings".
8