GRAPHTEC GL2000 Quick Start Manual page 10

15
. Key lock release with password
A password can be set to device to cancel the key lock.
(No password is set at factory default.)
<Operation Flow>
1. Set the password.
Press the ,
shown below. Specify a four-digit password.
Use the , ,
password.
In case you forgot your password, please contact us to acquire the master password.
2. Set the key lock operation.
Hold down the
3. Cancel the key lock.
Hold down the
The password setting screen shown below will be displayed. Set a password.
Entering an incorrect password will not unlock the key lock.
Key lock status will be retained when power is turned off.
9
, and ENTER keys at the same time to display the password setting screen
, keys to select numbers and press the [ENTER] key to fix the
and keys together for at least two seconds.
and keys together for at least two seconds.