GRAPHTEC GL2000 Quick Start Manual page 8

5
. QUIT
This key is primarily used for the following operations.
To cancel a setting when setting MENU.
To return to the MONITOR screen while the SPAN/TRACE/POSITION key is operated.
To cancel the interface restriction (When the keys are disabled).
To exit the replay display.
6
. Direction Keys
These keys are primarily used for selecting the item while setting menu and span setting
during digital display.
7
. ENTER
To fix setting items during menu configuration or finalize.
8
.
FAST FORWARD key
This key is primarily used for the following operations.
To move the cursor at high speed during replay.
To change the display order of the files in the file selection tool.
To set key lock (Hold down the left/right FAST FORWARD key for at least two seconds.
Press again to unlock.)
To set a password for cancelling the key lock.
(For the instructions on how to cancel the key lock, refer to the article related to the Key
lock in the User's Manual.)
9
. START/STOP(USB Drive Mode)
In the "USB Drive Mode", check the internal memory and SD card as external storage devices
on the PC.
To enter the USB Drive Mode, press down this key from when the power is turned on until the
display below appears.
When the display below is displayed, the device is recognized as removable disk and files can
be transferred and deleted from the PC.
7
(KEY LOCK)