Select Results - Beckman Coulter Navios Instructions For Use Manual

2
the parameter whose divider you wish to edit.
3
Place a check in the box next to the Listmode Parameter value you wish to enable.
NOTE
the prism divider and deletes it from any displays that were using it. If a prism divider is switched off,
any active prism plots and plots with prism divider displays also update them to reflect the modified
number of prism parameters in use.
4
the value that you wish to change and enter the required value within the range 0 to 1023.
5

Select Results

Navios software gives the flexibility of generating many different statistics and these are produced
using combinations of Regions and Gates.
A Gate is used to select events that may potentially be counted while Regions mark subpopulations
and determine whether an event is actually counted.
All Regions and Gates can be named according to your preference, allowing easy recognition of your
results.
773232AH
If no check is in the checkbox, the particular value is automatically set to OFF. This switches off
to accept all changes.
to abandon all changes.
Using Navios Software 10
Analysis Menu
10-139