Advertisement
MVP™ Driver QRG
Product
The MVP™ Driver is required to operate the CHAUVET® MVP™
Video Wall System. This Driver provides the interface between any
Description
DVI video source and all MVP™ video system components via the
LED Studio software application.
Note: LED Studio is provided free with the MVP™ Driver.
The MVP™ Driver enables media playback, configuration,
addressing, and remote power control from a rack mounted MVP™
Media System. The Driver has two etherCON® signal outputs that
connect to any type of MVP™ panel configuration.
The second signal output is pre-configured as a backup. The backup
provides complete signal reproduction of the main output at 1024 X
512 pixels.
The outputs can be alternately configured to run separately providing
a resolution of up to 2048 x 640 pixels.
The front panel enables manual control of the video wall brightness
providing three levels of brightness variations.
Page 4 of 12
Advertisement
