Advertisement
Manually
Adjusting
Brightness
LED table
Powering Up
the MVP™
Driver
The front panel enables you to adjust the brightness of your video
panels. Initially, brightness is defined in LED Studio. The
brightness default value range is 1 – 16. You can change the
brightness range in LED Studio, and manually adjust.
Use the Up and Down buttons on the front panel to manually
override the brightness setting defined in LED Studio. The
brightness value will display on the LED table.
Refer to the LED Studio User Manaul for more information and
instructions.
The range of brightness variations that can be defined are:
Range
1 – 16
1 - 32
1 – 64
This product supports AC from 100 to 240 VAC, 50-60 Hz. Once
plugged in, push the Power Switch on the back panel to ON.
Note: Make sure the power is turned off when connecting
equipment to the MVP™ Driver.
Page 11 of 12
Down (less brightness)
Description
Provides 16 brightness variations
Provides 32 brightness variations
Provides 64 brightness variations
MVP™ Driver QRG
Up (more brightness)
Advertisement
