Problem
Low or no suction
Abnormal movement
Low battery after charging
Robot does not react when
switching on and pressing button
For further help, technical advice, or to order spare or replacement parts contact Vileda (address see
last page)
The Vileda VR101 fulfils the EU directive 2012/19/EC, covering Electrical and electronic Robots and the manage-
ment of its disposal.
The packaging material is entirely recyclable, and marked with the recycling symbol. Follow local regulations for
scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of children's reach, as they are
potentially dangerous.
When the product has reached the end of its life please do not dispose of it with general household waste. To pre-
vent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources.
The
symbol identifies the Vileda VR101 as a product submitted to the regime of selective electrical Robot re-
cycling collection.
The product contains a Li-Ion battery which should not be disposed of with general household waste. Deposit
the battery in an official collection point for its recycling.
Batteries can be detrimental for the environment and can explode if they are exposed to high temperatures.
The violation of these precautions could cause fire and / or serious injuries.
For more detailed information about treatment, recovery and recycling of this product, please contact your local
city office, your household waste disposal service or the shop where you purchased the product.
For example, disposal of the Product and any part of the Product may need to be taken to a Designated Collection
Facility
Model
Working Voltage (V DC)
Charger
Rated Input Voltage (V AC)
Rated Input Current (A)
Charging Time
Battery
C73_2016_07 Robot VR 101_manual_intl_06062 Version: 2 703389
October 10, 2016 / TSU 152197
Troubleshooting
Possible reason
•
Dust box is full
•
Filter is blocked with dirt
•
Suction port is blocked
•
Filter is missing
•
Wheels are dirty
•
Cliff sensors are dirty
•
Charger or battery is
defective
•
Device is in deep sleep mode
due to very low battery
ENVIRONMENTAL AND PRODUCT RECYCLING
Product Specification
Possible solution
•
Empty dust box
•
Clean the filter with brush
•
Clear the port with brush
•
Put filter back in place
•
Clean wheels
•
Clean cliff sensors
•
Contact Vileda service
•
Connect to charger and
charge normally as
described in chapter
"charging battery".
Vileda VR101
7.2
Rated Power (W)ww
100-240
Rated Output Voltage (V DC)
0.5
Rated Output Current (A)
4 hours
Li-ion 3350mAh
G
23
11
1.1
11
Need help?
Do you have a question about the VR 101 and is the answer not in the manual?