Dp760 Dect Repeater Dissociation; Option 1: Using Dp760 Web Gui; Option 2: Using Page Button; Option 3: Using Repeater Management Mode On Dp750 - Grandstream Networks DP760 User Manual

DP760 DECT REPEATER DISSOCIATION

To disconnect DP760 DECT Repeater from the Base Station DP750, please refer to following options:

Option 1: Using DP760 Web GUI

To disconnect your DP760 DECT Repeater via web GUI, please refer to following steps:
1. Open Web browser on your computer.
2. Enter the DP760's IP address in the address bar of the browser.
3. Enter the administrator's username and password to access the Web Configuration Menu. (Default
username and password: admin/admin)
4. Navigate to Status > DECT Status > Global Functions and press Disconnect.
5. The DP760 DECT Repeater will be automatically disconnected from the DP750 and it will start again
scanning for available RFPs.

Option 2: Using Page Button

Long press on page button on the back panel of DP760 for 7 seconds, it will remove the association values
of the previous base station.

Option 3: Using Repeater Management Mode on DP750

To disconnect your DP760 DECT Repeater using the repeater management mode on DP750:
1. Access DP750 Web GUI (default username and password are: admin/admin).
2. Navigate to Status > DECT Repeater Status.
3. Select the repeater station from "Discovered Devices".
4. Clink Unlink button to dissociate the repeater from the base station.
DP760 User Manual
P a g e | 35