Grandstream Networks DP760 User Manual page 28

Web/SSH Access
User Password Configures user level password. Case sensitive and max length is 30 characters.
Confirm Password Configures the new user password again to confirm.
Configures admin level password. Case sensitive and max. length is 30
Admin Password
characters.
Confirm Password Configures the new admin password again to confirm.
Access Control White list for
Lists WAN side
Black list for
WAN side
Web/SSH Settings
HTTP Web Port Customizes HTTP port used to access repeater station web UI. Default is 80.
HTTPS Web Port Customizes HTTPS port used to access repeater station web UI. Default is 443.
Web Access Mode Determines the protocol to be used for the web interface access. Default is HTTP.
Disable SSH Disables SSH access. Default is No.
SSH Port Customizes SSH access port. Default is 22.
Date and Time
NTP Server Defines URL or IP address of the NTP (Network Time Protocol) server. Used by
the repeater to synchronize the date and time. A list of public NTP servers can be
found at
NTP Update Contacts NTP server at specified period of time (in minutes) to obtain the date
Interval and time. Default is 60 minutes.
Allow DHCP Option Obtains NTP server address from a DHCP server using DHCP Option 42; it will
42 to NTP Server override configured NTP Server. If set to "No", the repeater will use configured NTP
server to synchronize time and date even if a NTP server is provided by DHCP
server. Default is Yes.
Time Zone Selects time zone to define date/time on the repeater station.
Self-Defined Time Allows users to define their own time zone.
Zone
If white list exists, then only these IP addresses are allowed to
web and SSH access.
If black list exists and white list is empty, then only these IP
addresses are not allowed to web and SSH access.
http://www.ntp.org .
DP760 User Manual
P a g e | 28