Saving The Configuration Changes; Web Ui Access Level Management; Changing User Level Password - Grandstream Networks DP760 User Manual

Saving the Configuration Changes

After users make changes to the configuration, pressing the Save button will save but not apply the changes
until the Apply button on the top of web GUI page is clicked. Users can instead directly press the Save
and Apply button. We recommend rebooting or powering cycle the phone after applying all changes.

Web UI Access Level Management

There are two default passwords for the login page:
User Level
End User Level
Administrator Level
The password is case sensitive with a maximum length of 25 characters.
Note: When accessing the web GUI with normal user level, "Advanced Settings" page will be hidden.
When changing any settings, always SUBMIT them by pressing the Save or Save and Apply button on the
bottom of the page. If using the Save button, after making all the changes, click on the Apply button on top
of the page to submit. After submitting the changes in all the Web GUI pages, reboot DP760 to have the
changes take effect if necessary; most of the options under the Maintenance page require a reboot.

Changing User Level Password

1. Access your DP760 DECT Repeater web UI by entering its IP address in your favorite browser.
2. Enter your admin's username and password. (Default username and password: admin/admin)
3. Press Login to access your settings.
4. Go to Maintenance > Web/SSH Access.
5. In Web/SSH Access page, locate User Password section:
a. Type in your new user password in New Password field.
b. Type in again same entered password in Confirm Password field.
6. Press Save and Apply to save your new setting.
Username Password
user 123
admin admin
DP760 User Manual
Web Pages Allowed
Status, Network Settings and Maintenance pages
All pages
P a g e | 18